Safety Information & Handling

⚠️ WARNING: Highly Corrosive Material

Sodium Hydroxide is a highly corrosive substance. Proper safety precautions must be followed during handling, storage, and use. Always refer to the complete MSDS before handling.

Personal Protection Equipment (PPE)
  • Eye Protection: Chemical safety goggles or face shield (mandatory)
  • Hand Protection: Chemical-resistant gloves (rubber, neoprene, or PVC)
  • Body Protection: Chemical-resistant apron or full protective suit
  • Respiratory Protection: Use in well-ventilated areas; respirator if required
  • Footwear: Chemical-resistant safety boots
First Aid Measures
  • Eye Contact: Immediately flush with plenty of water for at least 15 minutes. Seek medical attention immediately.
  • Skin Contact: Remove contaminated clothing. Wash affected area with plenty of water and soap. Seek medical attention if irritation persists.
  • Inhalation: Move to fresh air immediately. If breathing is difficult, give oxygen. Seek medical attention.
  • Ingestion: Do NOT induce vomiting. Rinse mouth with water. Give water or milk to drink. Seek immediate medical attention.
Fire Fighting Measures

Non-combustible. However, contact with water generates heat and may cause spattering. Use dry chemical, CO₂, or water spray to fight fires involving caustic soda. Wear full protective equipment including self-contained breathing apparatus.

Spill & Leak Procedures
  • Evacuate area and ventilate thoroughly
  • Wear appropriate PPE before cleanup
  • Contain spill to prevent environmental contamination
  • Neutralize with dilute acid (under professional supervision)
  • Collect material and place in appropriate disposal containers
  • Flush area with water after cleanup

 

For complete safety information, please download and refer to the Material Safety Data Sheet (MSDS)